316L ASTM F-138 Implant Grade Stainless Steel
2mm|5/32 inch (4mm)
Labret Bottom Disc Size:
2.5mm|3/16 inch (5mm)
Labret Stud Bottom will be 2.5mm (small). You can request the larger 3/16 inch (5mm) size in the Order Comments Box during checkout
Cleaning Instructions: Do not clean or soak this jewelry in peroxide or alcohol
. It can damage the finish or the stones. Only plain stainless steel or non anodized titanium parts can be cleaned this way. We recommend using anti-bacterial soap and warm water to clean this jewelry. Please consult your piercing professional for sterilization instructions.
Please note that the color of the actual item may vary slightly from the color on your screen.
Colors of actual items may vary slightly from colors shown on device screen due to differences in monitor settings
Age Warning: This Item is Not Intended for Use by Children Under the Age of 14!
Not Sure What Size You Need? See Our Online Body Jewelry Measuring Chart
and tips on How to Read a Ruler
Suitable Piercing Locations:
Suitable Piercing Types:
Angel Bites|Auricle|Beauty Mark|Canine Bites|Cartilage|Cheek|Chin|Cleft |Conch|Conch Inner|Conch Outer|Crawford|Crayfish|Cyber Bites|Dahlia|Dimples|Dolphin Bites|Ear|Helix|High Nostril|Forward Helix|Forward Pinna|Horizontal Labret|KA|Labret|Lip|Lobe|Lowbret|Madonna|Medusa|Monroe|Nose|Philtrum|Pinna|Scapha|Shark Bites|Snake Bites|Spider Bites|Tongue|Tragus|Upbret
Light Skin Tone Lip Ring/Earring Retainer helps hide your piercing for work or school. Internally Threaded Labret Stud can be worn to help hide your piercings. Labret studs can be used as a Lip Ring, Snakebites, Monroe Stud, Cartilage Earring, Tragus Earring, or 18 gauge, 16 gauge, 14 gauge or 12 gauge Ear Lobe Piercings and more. This labret stud can also be used as a fake beauty mark or fake mole. Three colors available; Light Skin Tone. Please keep in mind that the colors you see here may not exactly match the item you receive due to the setting on the screen you are viewing these products on.
The labret stud has a color coated surgical stainless steel internally threaded top and is available in 2mm diameter (18g-16g only) or 4mm (5/32 inch). Internally threaded labret studs have the threads on the top which screw into the hollow bottom labret post.
The 316L Surgical Stainless Steel labret stud bottom is available in 18 gauge with a 2.5mm diameter bottom disk or 16 gauge, 14 gauge or 12 gauge (3/16 inch-5mm diameter bottom disk) and available in the following lengths: 5/32 inch (4mm-18 gauge only), 1/4 inch (6mm), 5/16 inch (8mm), 3/8 inch (10mm), 7/16 inch (11mm) and 1/2 inch (12mm) long. Labret Post length is measured in a straight line between the flat back and the top ball, not including back or flat disk. These are sold individually, not in pairs. Photo is enlarged to show detail.
This item is suitable for beauty mark labret, 18 gauge earrings, 16 gauge earrings, 14 gauge earrings, 12 gauge earrings, tragus studs, skin tone cartilage earrings, labret studs, Madonna piercings, Monroe piercings, lip rings, tragus earrings, ear cartilage piercings, helix piercings, forward helix piercings, ear lobe piercings, tragus piercings, lip piercings, or almost any 18 gauge, 16 gauge, 14 gauge or 12 gauge piercing.